<fillRect> (Fill Rectangle)

This element specifies a fill rectangle. When stretching of an image is specified, a source rectangle, srcRect, is scaled to fit the specified fill rectangle.

Each edge of the fill rectangle is defined by a percentage offset from the corresponding edge of the shape's bounding box. A positive percentage specifies an inset, while a negative percentage specifies an outset. For example, a left offset of 25% specifies that the left edge of the fill rectangle is located to the right of the bounding box's left edge by an amount equal to 25% of the bounding box's width.

example:

<a:blipFill>
  <a:blip r:embed="rId2"/>
  <a:stretch>
      <a:fillRect b="10000" r="25000"/>
  </a:stretch>
</a:blipFill>

The above image is stretched to fill the entire rectangle except for the bottom 10% and rightmost 25%.

Parent Elements

<stretch>5.1.10.56)

Attributes

Description

<b> (Bottom Offset)

Specifies the bottom edge of the rectangle.

The possible values for this attribute are defined by the ST_Percentage simple type (§5.1.12.41).

<l> (Left Offset)

Specifies the left edge of the rectangle.

The possible values for this attribute are defined by the ST_Percentage simple type (§5.1.12.41).

<r> (Right Offset)

Specifies the right edge of the rectangle.

The possible values for this attribute are defined by the ST_Percentage simple type (§5.1.12.41).

<t> (Top Offset)

Specifies the top edge of the rectangle.

The possible values for this attribute are defined by the ST_Percentage simple type (§5.1.12.41).

The following XML Schema fragment defines the contents of this element:

<complexType name="CT_RelativeRect">
	<attribute name="l" type="ST_Percentage" use="optional" default="0"/>
	<attribute name="t" type="ST_Percentage" use="optional" default="0"/>
	<attribute name="r" type="ST_Percentage" use="optional" default="0"/>
	<attribute name="b" type="ST_Percentage" use="optional" default="0"/>
</complexType>