<fillToRect> (Fill To Rectangle)

This element defines the "focus" rectangle for the center shade, specified relative to the fill tile rectangle. The center shade fills the entire tile except the margins specified by each attribute.

Each edge of the center shade rectangle is defined by a percentage offset from the corresponding edge of the tile rectangle. A positive percentage specifies an inset, while a negative percentage specifies an outset. For example, a left offset of 25% specifies that the left edge of the center shade rectangle is located to the right of the tile rectangle's left edge by an amount equal to 25% of the tile rectangle's width.

example:

<a:path path="rect">
  <a:fillToRect l="50000" r="50000" t="50000" b="50000"/>
</a:path>

In the above shape, the rectangle defined by <fillToRect> is a single point in the center of the shape. This creates the effect of the center shade focusing at a point in the center of the region.

example:

<a:path path="rect">
  <a:fillToRect l="25000" t="25000" r="25000" b="0"/>
</a:path>

The center shade occupies the rectangle defined by excluding the topmost, leftmost, and rightmost 25% of the region. Therefore, the gradient fills the remaining leftmost 25%, topmost 25%, and rightmost 25% of the region.

Parent Elements

<path>5.1.10.46)

Attributes

Description

<b> (Bottom Offset)

Specifies the bottom edge of the rectangle.

The possible values for this attribute are defined by the ST_Percentage simple type (§5.1.12.41).

<l> (Left Offset)

Specifies the left edge of the rectangle.

The possible values for this attribute are defined by the ST_Percentage simple type (§5.1.12.41).

<r> (Right Offset)

Specifies the right edge of the rectangle.

The possible values for this attribute are defined by the ST_Percentage simple type (§5.1.12.41).

<t> (Top Offset)

Specifies the top edge of the rectangle.

The possible values for this attribute are defined by the ST_Percentage simple type (§5.1.12.41).

The following XML Schema fragment defines the contents of this element:

<complexType name="CT_RelativeRect">
	<attribute name="l" type="ST_Percentage" use="optional" default="0"/>
	<attribute name="t" type="ST_Percentage" use="optional" default="0"/>
	<attribute name="r" type="ST_Percentage" use="optional" default="0"/>
	<attribute name="b" type="ST_Percentage" use="optional" default="0"/>
</complexType>