<ST_ConstraintType> (Constraint Type)

This simple type defines the list of possible constraints available for use.

This simple type's contents are a restriction of the XML Schema token datatype.

The following are possible enumeration values for this type:

Enumeration Value

Description

<alignOff> (Alignment Offset)

This value defines the alignment offset for a node.

<b> (Bottom)

The bottom of the node.

<begMarg> (Beginning Margin)

Specifies the beginning margin.

<begPad> (Beginning Padding)

Specifies the beginning padding.

<bendDist> (Bending Distance)

Specifies the distance from the start of a connector to a bend in the connector.

<bMarg> (Bottom Margin)

Specifies the bottom margin.

<bOff> (Bottom Offset)

Specifies the bottom offset.

<connDist> (Connection Distance)

Specifies the connection distance.

<ctrX> (Center Height)

Specifies the center of the height.

<ctrXOff> (Center X Offset)

Specifies the center x coordinate offset.

<ctrY> (Center Width)

Specifies the center of the width.

<ctrYOff> (Center Y Offset)

Specifies the center y coordinate offset.

<diam> (Diameter)

Specifies the diameter.

<endMarg> (End Margin)

Specifies the ending margin.

<endPad> (End Padding)

Specifies the end padding.

<h> (Height)

Specifies the height.

<hArH> (Arrowhead Height)

Specifies the height of the arrowhead portion of the connector.

<hOff> (Height Offset)

Specifies the amount to offset the height.

<l> (Left)

Specifies the left constraint.

<lMarg> (Left Margin)

Specifies the left margin.

<lOff> (Left Offset)

Specifies the left offset.

<none> (Unknown)

Unknown constraint.

<primFontSz> (Primary Font Size)

The primary font size.

<pyraAcctRatio> (Pyramid Accent Ratio)

Specifies the fraction of the width of the diagram that is reserved for the fly outs at their shortest distance.

<r> (Right)

Specifies the right constraint.

<rMarg> (Right Margin)

Specifies the right margin constraint.

<rOff> (Right Offset)

Specifies the right offset constraint.

<secFontSz> (Secondary Font Size)

The secondary font size.

<secSibSp> (Secondary Sibling Spacing)

The secondary sibling spacing.

<sibSp> (Sibling Spacing)

Specifies the minimum distance between sibling shapes.

<sp> (Spacing)

Specifies the spacing defined.

<stemThick> (Stem Thickness)

Specifies the thickness of the arrow’s shaft.

<t> (Top)

Specifies the top constraint.

<tMarg> (Top Margin)

Top margin constraint.

<tOff> (Top Offset)

Top offset constraint.

<userA> (User Defined A)

User defined information.

<userB> (User Defined B)

User defined information.

<userC> (User Defined C)

User defined information.

<userD> (User Defined D)

User defined information.

<userE> (User Defined E)

User defined information.

<userF> (User Defined F)

User defined information.

<userG> (User Defined G)

User defined information.

<userH> (User Defined H)

User defined information.

<userI> (User Defined I)

User defined information.

<userJ> (User Defined J)

User defined information.

<userK> (User Defined K)

User defined information.

<userL> (User Defined L)

User defined information.

<userM> (User Defined M)

User defined information.

<userN> (User Defined N)

User defined information.

<userO> (User Defined O)

User defined information.

<userP> (User Defined P)

User defined information.

<userQ> (User Defined Q)

User defined information.

<userR> (User Defined R)

User defined information.

<userS> (User Defined S)

User defined information.

<userT> (User Defined T)

User defined information.

<userU> (User Defined U)

User defined information.

<userV> (User Defined V)

User defined information.

<userW> (User Defined W)

User defined information.

<userX> (User Defined X)

User defined information.

<userY> (User Defined Y)

User defined information.

<userZ> (User Defined Z)

User defined information.

<w> (Width)

The width parameter.

<wArH> (Arrowhead Width)

Specifies the width of the arrowhead portion of the connector.

<wOff> (Width Offset)

Offsets the width by the specified amount.

Referenced By

<constr@refType>5.9.2.8); <constr@type>5.9.2.8); <rule@type>5.9.2.24)

The following XML Schema fragment defines the contents of this simple type:

<simpleType name="ST_ConstraintType" final="restriction">
	<restriction base="xsd:token">
	<enumeration value="none"/>
	<enumeration value="alignOff"/>
	<enumeration value="begMarg"/>
	<enumeration value="bendDist"/>
	<enumeration value="begPad"/>
	<enumeration value="b"/>
	<enumeration value="bMarg"/>
	<enumeration value="bOff"/>
	<enumeration value="ctrX"/>
	<enumeration value="ctrXOff"/>
	<enumeration value="ctrY"/>
	<enumeration value="ctrYOff"/>
	<enumeration value="connDist"/>
	<enumeration value="diam"/>
	<enumeration value="endMarg"/>
	<enumeration value="endPad"/>
	<enumeration value="h"/>
	<enumeration value="hArH"/>
	<enumeration value="hOff"/>
	<enumeration value="l"/>
	<enumeration value="lMarg"/>
	<enumeration value="lOff"/>
	<enumeration value="r"/>
	<enumeration value="rMarg"/>
	<enumeration value="rOff"/>
	<enumeration value="primFontSz"/>
	<enumeration value="pyraAcctRatio"/>
	<enumeration value="secFontSz"/>
	<enumeration value="sibSp"/>
	<enumeration value="secSibSp"/>
	<enumeration value="sp"/>
	<enumeration value="stemThick"/>
	<enumeration value="t"/>
	<enumeration value="tMarg"/>
	<enumeration value="tOff"/>
	<enumeration value="userA"/>
	<enumeration value="userB"/>
	<enumeration value="userC"/>
	<enumeration value="userD"/>
	<enumeration value="userE"/>
	<enumeration value="userF"/>
	<enumeration value="userG"/>
	<enumeration value="userH"/>
	<enumeration value="userI"/>
	<enumeration value="userJ"/>
	<enumeration value="userK"/>
	<enumeration value="userL"/>
	<enumeration value="userM"/>
	<enumeration value="userN"/>
	<enumeration value="userO"/>
	<enumeration value="userP"/>
	<enumeration value="userQ"/>
	<enumeration value="userR"/>
	<enumeration value="userS"/>
	<enumeration value="userT"/>
	<enumeration value="userU"/>
	<enumeration value="userV"/>
	<enumeration value="userW"/>
	<enumeration value="userX"/>
	<enumeration value="userY"/>
	<enumeration value="userZ"/>
	<enumeration value="w"/>
	<enumeration value="wArH"/>
	<enumeration value="wOff"/>
	</restriction>
</simpleType>