<ST_ShapeType> (Preset Shape Types)

This simple type specifies the preset shape geometry that is to be used for a shape. An enumeration of this type is used so that a custom geometry does not have to be specified but instead can be constructed automatically by the generating application. For each enumeration listed there is also the corresponding DrawingML code that would be used to construct this shape were it a custom geometry. Within the construction code for each of these preset shapes there are predefined guides that the generating application must maintain for calculation purposes at all times. The necessary guides should have the following values.

This simple type's contents are a restriction of the XML Schema token datatype.

The following are possible enumeration values for this type:

Enumeration Value

Description

<accentBorderCallout1> (Callout 1 with Border and Accent Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<accentBorderCallout2> (Callout 2 with Border and Accent Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<accentBorderCallout3> (Callout 3 with Border and Accent Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<accentCallout1> (Callout 1 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<accentCallout2> (Callout 2 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<accentCallout3> (Callout 3 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<actionButtonBackPrevious> (Back or Previous Button Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<actionButtonBeginning> (Beginning Button Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<actionButtonBlank> (Blank Button Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<actionButtonDocument> (Document Button Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<actionButtonEnd> (End Button Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<actionButtonForwardNext> (Forward or Next Button Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<actionButtonHelp> (Help Button Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<actionButtonHome> (Home Button Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<actionButtonInformation> (Information Button Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<actionButtonMovie> (Movie Button Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<actionButtonReturn> (Return Button Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<actionButtonSound> (Sound Button Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<arc> (Curved Arc Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<bentArrow> (Bent Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<bentConnector2> (Bent Connector 2 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<bentConnector3> (Bent Connector 3 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<bentConnector4> (Bent Connector 4 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<bentConnector5> (Bent Connector 5 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<bentUpArrow> (Bent Up Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<bevel> (Bevel Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<blockArc> (Block Arc Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<borderCallout1> (Callout 1 with Border Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<borderCallout2> (Callout 2 with Border Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<borderCallout3> (Callout 3 with Border Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<bracePair> (Brace Pair Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<bracketPair> (Bracket Pair Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<callout1> (Callout 1 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<callout2> (Callout 2 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<callout3> (Callout 3 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<can> (Can Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<chartPlus> (Chart Plus Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<chartStar> (Chart Star Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<chartX> (Chart X Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<chevron> (Chevron Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<chord> (Chord Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<circularArrow> (Circular Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<cloud> (Cloud Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<cloudCallout> (Callout Cloud Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<corner> (Corner Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<cornerTabs> (Corner Tabs Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<cube> (Cube Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<curvedConnector2> (Curved Connector 2 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<curvedConnector3> (Curved Connector 3 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<curvedConnector4> (Curved Connector 4 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<curvedConnector5> (Curved Connector 5 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<curvedDownArrow> (Curved Down Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<curvedLeftArrow> (Curved Left Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<curvedRightArrow> (Curved Right Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<curvedUpArrow> (Curved Up Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<decagon> (Decagon Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<diagStripe> (Diagonal Stripe Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<diamond> (Diamond Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<dodecagon> (Dodecagon Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<donut> (Donut Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<doubleWave> (Double Wave Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<downArrow> (Down Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<downArrowCallout> (Callout Down Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<ellipse> (Ellipse Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<ellipseRibbon> (Ellipse Ribbon Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<ellipseRibbon2> (Ellipse Ribbon 2 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartAlternateProcess> (Alternate Process Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartCollate> (Collate Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartConnector> (Connector Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartDecision> (Decision Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartDelay> (Delay Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartDisplay> (Display Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartDocument> (Document Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartExtract> (Extract Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartInputOutput> (Input Output Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartInternalStorage> (Internal Storage Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartMagneticDisk> (Magnetic Disk Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartMagneticDrum> (Magnetic Drum Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartMagneticTape> (Magnetic Tape Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartManualInput> (Manual Input Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartManualOperation> (Manual Operation Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartMerge> (Merge Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartMultidocument> (Multi-Document Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartOfflineStorage> (Offline Storage Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartOffpageConnector> (Off-Page Connector Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartOnlineStorage> (Online Storage Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartOr> (Or Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartPredefinedProcess> (Predefined Process Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartPreparation> (Preparation Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartProcess> (Process Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartPunchedCard> (Punched Card Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartPunchedTape> (Punched Tape Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartSort> (Sort Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartSummingJunction> (Summing Junction Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<flowChartTerminator> (Terminator Flow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<foldedCorner> (Folded Corner Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<frame> (Frame Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<funnel> (Funnel Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<gear6> (Gear 6 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<gear9> (Gear 9 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<halfFrame> (Half Frame Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<heart> (Heart Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<heptagon> (Heptagon Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<hexagon> (Hexagon Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<homePlate> (Home Plate Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<horizontalScroll> (Horizontal Scroll Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<irregularSeal1> (Irregular Seal 1 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<irregularSeal2> (Irregular Seal 2 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<leftArrow> (Left Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<leftArrowCallout> (Callout Left Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<leftBrace> (Left Brace Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<leftBracket> (Left Bracket Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<leftCircularArrow> (Left Circular Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<leftRightArrow> (Left Right Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<leftRightArrowCallout> (Callout Left Right Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<leftRightCircularArrow> (Left Right Circular Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<leftRightRibbon> (Left Right Ribbon Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<leftRightUpArrow> (Left Right Up Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<leftUpArrow> (Left Up Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<lightningBolt> (Lightning Bolt Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<line> (Line Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<lineInv> (Line Inverse Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<mathDivide> (Divide Math Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<mathEqual> (Equal Math Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<mathMinus> (Minus Math Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<mathMultiply> (Multiply Math Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<mathNotEqual> (Not Equal Math Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<mathPlus> (Plus Math Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<moon> (Moon Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<nonIsoscelesTrapezoid> (Non-Isosceles Trapezoid Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<noSmoking> (No Smoking Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<notchedRightArrow> (Notched Right Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<octagon> (Octagon Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<parallelogram> (Parallelogram Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<pentagon> (Pentagon Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<pie> (Pie Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<pieWedge> (Pie Wedge Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<plaque> (Plaque Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<plaqueTabs> (Plaque Tabs Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<plus> (Plus Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<quadArrow> (Quad-Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<quadArrowCallout> (Callout Quad-Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<rect> (Rectangle Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<ribbon> (Ribbon Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<ribbon2> (Ribbon 2 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<rightArrow> (Right Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<rightArrowCallout> (Callout Right Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<rightBrace> (Right Brace Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<rightBracket> (Right Bracket Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<round1Rect> (One Round Corner Rectangle Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<round2DiagRect> (Two Diagonal Round Corner Rectangle Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<round2SameRect> (Two Same-side Round Corner Rectangle Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<roundRect> (Round Corner Rectangle Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<rtTriangle> (Right Triangle Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<smileyFace> (Smiley Face Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<snip1Rect> (One Snip Corner Rectangle Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<snip2DiagRect> (Two Diagonal Snip Corner Rectangle Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<snip2SameRect> (Two Same-side Snip Corner Rectangle Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<snipRoundRect> (One Snip One Round Corner Rectangle Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<squareTabs> (Square Tabs Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<star10> (Ten Pointed Star Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<star12> (Twelve Pointed Star Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<star16> (Sixteen Pointed Star Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<star24> (Twenty Four Pointed Star Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<star32> (Thirty Two Pointed Star Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<star4> (Four Pointed Star Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<star5> (Five Pointed Star Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<star6> (Six Pointed Star Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<star7> (Seven Pointed Star Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<star8> (Eight Pointed Star Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<straightConnector1> (Straight Connector 1 Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<stripedRightArrow> (Striped Right Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<sun> (Sun Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<swooshArrow> (Swoosh Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<teardrop> (Teardrop Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<trapezoid> (Trapezoid Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<triangle> (Triangle Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<upArrow> (Up Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<upArrowCallout> (Callout Up Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<upDownArrow> (Up Down Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<upDownArrowCallout> (Callout Up Down Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<uturnArrow> (U-Turn Arrow Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<verticalScroll> (Vertical Scroll Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<wave> (Wave Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<wedgeEllipseCallout> (Callout Wedge Ellipse Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<wedgeRectCallout> (Callout Wedge Rectangle Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

<wedgeRoundRectCallout> (Callout Wedge Round Rectangle Shape)

Specifies a preset shape geometry. This geometry shall be designed to match the normative image below.

Note:

Referenced By

<prstGeom@prst> (§5.1.11.18); <ST_LayoutShapeType> (§5.9.7.40)

The following XML Schema fragment defines the contents of this simple type:

<simpleType name="ST_ShapeType">
	<restriction base="xsd:token">
	<enumeration value="line"/>
	<enumeration value="lineInv"/>
	<enumeration value="triangle"/>
	<enumeration value="rtTriangle"/>
	<enumeration value="rect"/>
	<enumeration value="diamond"/>
	<enumeration value="parallelogram"/>
	<enumeration value="trapezoid"/>
	<enumeration value="nonIsoscelesTrapezoid"/>
	<enumeration value="pentagon"/>
	<enumeration value="hexagon"/>
	<enumeration value="heptagon"/>
	<enumeration value="octagon"/>
	<enumeration value="decagon"/>
	<enumeration value="dodecagon"/>
	<enumeration value="star4"/>
	<enumeration value="star5"/>
	<enumeration value="star6"/>
	<enumeration value="star7"/>
	<enumeration value="star8"/>
	<enumeration value="star10"/>
	<enumeration value="star12"/>
	<enumeration value="star16"/>
	<enumeration value="star24"/>
	<enumeration value="star32"/>
	<enumeration value="roundRect"/>
	<enumeration value="round1Rect"/>
	<enumeration value="round2SameRect"/>
	<enumeration value="round2DiagRect"/>
	<enumeration value="snipRoundRect"/>
	<enumeration value="snip1Rect"/>
	<enumeration value="snip2SameRect"/>
	<enumeration value="snip2DiagRect"/>
	<enumeration value="plaque"/>
	<enumeration value="ellipse"/>
	<enumeration value="teardrop"/>
	<enumeration value="homePlate"/>
	<enumeration value="chevron"/>
	<enumeration value="pieWedge"/>
	<enumeration value="pie"/>
	<enumeration value="blockArc"/>
	<enumeration value="donut"/>
	<enumeration value="noSmoking"/>
	<enumeration value="rightArrow"/>
	<enumeration value="leftArrow"/>
	<enumeration value="upArrow"/>
	<enumeration value="downArrow"/>
	<enumeration value="stripedRightArrow"/>
	<enumeration value="notchedRightArrow"/>
	<enumeration value="bentUpArrow"/>
	<enumeration value="leftRightArrow"/>
	<enumeration value="upDownArrow"/>
	<enumeration value="leftUpArrow"/>
	<enumeration value="leftRightUpArrow"/>
	<enumeration value="quadArrow"/>
	<enumeration value="leftArrowCallout"/>
	<enumeration value="rightArrowCallout"/>
	<enumeration value="upArrowCallout"/>
	<enumeration value="downArrowCallout"/>
	<enumeration value="leftRightArrowCallout"/>
	<enumeration value="upDownArrowCallout"/>
	<enumeration value="quadArrowCallout"/>
	<enumeration value="bentArrow"/>
	<enumeration value="uturnArrow"/>
	<enumeration value="circularArrow"/>
	<enumeration value="leftCircularArrow"/>
	<enumeration value="leftRightCircularArrow"/>
	<enumeration value="curvedRightArrow"/>
	<enumeration value="curvedLeftArrow"/>
	<enumeration value="curvedUpArrow"/>
	<enumeration value="curvedDownArrow"/>
	<enumeration value="swooshArrow"/>
	<enumeration value="cube"/>
	<enumeration value="can"/>
	<enumeration value="lightningBolt"/>
	<enumeration value="heart"/>
	<enumeration value="sun"/>
	<enumeration value="moon"/>
	<enumeration value="smileyFace"/>
	<enumeration value="irregularSeal1"/>
	<enumeration value="irregularSeal2"/>
	<enumeration value="foldedCorner"/>
	<enumeration value="bevel"/>
	<enumeration value="frame"/>
	<enumeration value="halfFrame"/>
	<enumeration value="corner"/>
	<enumeration value="diagStripe"/>
	<enumeration value="chord"/>
	<enumeration value="arc"/>
	<enumeration value="leftBracket"/>
	<enumeration value="rightBracket"/>
	<enumeration value="leftBrace"/>
	<enumeration value="rightBrace"/>
	<enumeration value="bracketPair"/>
	<enumeration value="bracePair"/>
	<enumeration value="straightConnector1"/>
	<enumeration value="bentConnector2"/>
	<enumeration value="bentConnector3"/>
	<enumeration value="bentConnector4"/>
	<enumeration value="bentConnector5"/>
	<enumeration value="curvedConnector2"/>
	<enumeration value="curvedConnector3"/>
	<enumeration value="curvedConnector4"/>
	<enumeration value="curvedConnector5"/>
	<enumeration value="callout1"/>
	<enumeration value="callout2"/>
	<enumeration value="callout3"/>
	<enumeration value="accentCallout1"/>
	<enumeration value="accentCallout2"/>
	<enumeration value="accentCallout3"/>
	<enumeration value="borderCallout1"/>
	<enumeration value="borderCallout2"/>
	<enumeration value="borderCallout3"/>
	<enumeration value="accentBorderCallout1"/>
	<enumeration value="accentBorderCallout2"/>
	<enumeration value="accentBorderCallout3"/>
	<enumeration value="wedgeRectCallout"/>
	<enumeration value="wedgeRoundRectCallout"/>
	<enumeration value="wedgeEllipseCallout"/>
	<enumeration value="cloudCallout"/>
	<enumeration value="cloud"/>
	<enumeration value="ribbon"/>
	<enumeration value="ribbon2"/>
	<enumeration value="ellipseRibbon"/>
	<enumeration value="ellipseRibbon2"/>
	<enumeration value="leftRightRibbon"/>
	<enumeration value="verticalScroll"/>
	<enumeration value="horizontalScroll"/>
	<enumeration value="wave"/>
	<enumeration value="doubleWave"/>
	<enumeration value="plus"/>
	<enumeration value="flowChartProcess"/>
	<enumeration value="flowChartDecision"/>
	<enumeration value="flowChartInputOutput"/>
	<enumeration value="flowChartPredefinedProcess"/>
	<enumeration value="flowChartInternalStorage"/>
	<enumeration value="flowChartDocument"/>
	<enumeration value="flowChartMultidocument"/>
	<enumeration value="flowChartTerminator"/>
	<enumeration value="flowChartPreparation"/>
	<enumeration value="flowChartManualInput"/>
	<enumeration value="flowChartManualOperation"/>
	<enumeration value="flowChartConnector"/>
	<enumeration value="flowChartPunchedCard"/>
	<enumeration value="flowChartPunchedTape"/>
	<enumeration value="flowChartSummingJunction"/>
	<enumeration value="flowChartOr"/>
	<enumeration value="flowChartCollate"/>
	<enumeration value="flowChartSort"/>
	<enumeration value="flowChartExtract"/>
	<enumeration value="flowChartMerge"/>
	<enumeration value="flowChartOfflineStorage"/>
	<enumeration value="flowChartOnlineStorage"/>
	<enumeration value="flowChartMagneticTape"/>
	<enumeration value="flowChartMagneticDisk"/>
	<enumeration value="flowChartMagneticDrum"/>
	<enumeration value="flowChartDisplay"/>
	<enumeration value="flowChartDelay"/>
	<enumeration value="flowChartAlternateProcess"/>
	<enumeration value="flowChartOffpageConnector"/>
	<enumeration value="actionButtonBlank"/>
	<enumeration value="actionButtonHome"/>
	<enumeration value="actionButtonHelp"/>
	<enumeration value="actionButtonInformation"/>
	<enumeration value="actionButtonForwardNext"/>
	<enumeration value="actionButtonBackPrevious"/>
	<enumeration value="actionButtonEnd"/>
	<enumeration value="actionButtonBeginning"/>
	<enumeration value="actionButtonReturn"/>
	<enumeration value="actionButtonDocument"/>
	<enumeration value="actionButtonSound"/>
	<enumeration value="actionButtonMovie"/>
	<enumeration value="gear6"/>
	<enumeration value="gear9"/>
	<enumeration value="funnel"/>
	<enumeration value="mathPlus"/>
	<enumeration value="mathMinus"/>
	<enumeration value="mathMultiply"/>
	<enumeration value="mathDivide"/>
	<enumeration value="mathEqual"/>
	<enumeration value="mathNotEqual"/>
	<enumeration value="cornerTabs"/>
	<enumeration value="squareTabs"/>
	<enumeration value="plaqueTabs"/>
	<enumeration value="chartX"/>
	<enumeration value="chartStar"/>
	<enumeration value="chartPlus"/>
	</restriction>
</simpleType>